How to Set Up Your Raspberry Pi Pico W
1.
2.
Get your USB cable ready
The cable has a small end and a big end. The small end goes into your Raspberry Pi Pico W.
3.
Hold the BOOTSEL button
On the Pico W, there's a little button called BOOTSEL. Hold it down with your finger.
4.
Plug it into your computer
While still holding BOOTSEL, plug the big end of the USB cable into your computer. Let go of the BOOTSEL button after it's plugged in.
5.
Your Pico shows up like a USB drive
Your computer will open a window, just like when you plug in a USB stick. The drive will be called Raspberry Pi Pico.
6.
Copy the file
Find the firmware file you downloaded and drag it into the Pico window. Once it's done, the Pico will restart by itself, and the window will close.
✅ Now your Raspberry Pi Pico W has MicroPython ready to use — and you are ready to use Embedible! 🚀